Thanks for the reply. I just replaced all four wheel bearings last year so I thought it might be the accelerometer sensor on the passenger side floor but I have no diagnostic codes for 28TCS. I do have two codes for PCM. P0420HC and P0430 HC. Just had the upper Oxygen sensors replaced when I had the clutch replaced a few months ago so maybe the aft oxygen sensors have gone bad. Maybe the Yaw sensor I Replaced a few months ago is bad. Not sure. Would very stiff shocks effect the traction control sensors. I installed a set of Doug Rippie Bilstein shocks that are way stiffer then Bilstein HD shocks. Anyway thanks for the info, Phil
|