grumpyvette
retired mech engineer
short time deal/12 ton press
buy the march 2010 issue of CAR CRAFT MAGAZINE, on approximately pg 56 theres a coupon for a 12 ton hydraulic press from HF for $80 that normally sells for $129 on sale and $139 not on sale
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?itemnumber=33497&Submit=Go
http://forum.grumpysperformance.com/viewtopic.php?f=33&t=80&p=5607&hilit=u+joints#p5607
he money saved on a single u-joint swap on a corvette will pay for the press
the local machine shop wanted $20 EACH just to press out and re-install the U-joints, with ME supplying the u-joints or $40 each if they supplied the u-joints, keep in mind theres 6 u-joints in a corvette, two on the drive shaft and two on EACH half shaft, and if ones bad thru normal wear and mileage then the others have significant mileage on them and should be replaced at the same time
buy the march 2010 issue of CAR CRAFT MAGAZINE, on approximately pg 56 theres a coupon for a 12 ton hydraulic press from HF for $80 that normally sells for $129 on sale and $139 not on sale
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?itemnumber=33497&Submit=Go
http://forum.grumpysperformance.com/viewtopic.php?f=33&t=80&p=5607&hilit=u+joints#p5607
he money saved on a single u-joint swap on a corvette will pay for the press
the local machine shop wanted $20 EACH just to press out and re-install the U-joints, with ME supplying the u-joints or $40 each if they supplied the u-joints, keep in mind theres 6 u-joints in a corvette, two on the drive shaft and two on EACH half shaft, and if ones bad thru normal wear and mileage then the others have significant mileage on them and should be replaced at the same time
Last edited: