• Got the Contributing Memberships stuff finally worked out and made up a thread as a sort of "How-To" to help people figure out how to participate. So if you need help figuring it out, here's the thread you need to take a look at -> http://www.corvetteflorida.com/forums/showthread.php?t=3581 Thank you, everyone! Rich Z.

Dyno Tuning Shop in Tallahassee, Fl

Jaws Racing

New member
1320 SW Capital Circle 32310

We have a in ground Dynojet 224xLC and use SCT and HP tuners for tuning.

$75 for 3 pulls with a/f
$100 per hour with a/f - unlimited pulls
We can also log boost or any 5volt reference directly to the dyno graph. We also have the Dynojet DJ-DLM ODB-II scanner which datalog's any ODB-II PIDs directly to the Dyno Graph. This is great for showing what timing the car is running during a pull. For more info on the Dynojet DJ-DLM Click here and select the Datalink tab

$400 for Dyno tune using HP Tuners
$550 for Dyno Tune using SCT Xcalibrator2s (only available on 1998 - 2004 Corvette / Z06)

The SCT tunes are great for people who want to use Nitrous. Go to the track run it N/A and with the SCT Xcal2 you can then load a safe nitrous tune while at the track. The Xcal2 also offers datalogging and Check Engine light diagnostics.

Tony Whetstone
Dynojet 224xLC
Ford/Gm/Chrysler Tuning
Jaws Racing
 
Back
Top